This recently completed EllisDon project is a six-story tower that will give the Penticton Region a state-of-the-art hospital to service the South Okanagan region. Interior Health selected Ellis Don in conjunction with Parkin Architects to design and manage the construction and maintenance of this new facility in Penticton. InterCoast worked with Nathan Morlock of Walberg Contracting, the sub contractor to design assist and schedule the installation of Ten Plus louvers on thi

A picture is a thousand words here. Illustrated here are the 3 most common louver blades types that are used in Western Canada. From left to right, they are as follows: 1) Model D4493 Drainable Louver. These louvers are designed to collect water that flows down the individual blades and disperse the rainwater through channels to the mullion and down to the drain. 2) Model R5455 Storm Resistant Drainable Louver. Where superior storm resistance and no water ingress can be toler

There is beauty in the backside. Everyone looks to the front of the building for the Architectural elegance and beauty of design. We go to the back side because we see beauty in louvers. This project north of 60 in Yellowknife in is the furthest most outreach where Ten Plus louvers have been installed. The design build Consortium consisted of Clarkbuilders/Bird Construction and Flynn Canada. InterCoast/Ten Plus is proud to have assisted in this design assist Consortium. For m

As described by Calgary Mayor Naheed Nenshi the new Central Library is a "new icon for the city" This landmark is an innovative design by DIALOG in conjunction with Norwegian American architecture firm Snøhetta their design incorporates Ten Plus louvers and vision screenings on the rooftop. Flynn Canada in Calgary the exterior cladding installer chose Ten Plus louvers and vision screenings to be the supplier of choice for this project. InterCoast/ Ten Plus are proud to be a

Ten Plus Is proud to be the major louvers supplier on this project. Of particular note, is the bank of Louvers around the entire building on the 15th floor. Pictured in the insert is curved corner. This was a particularly difficult design because the louvers blades had to be cut in segments to match the profile of the straight louver blades. Thermal Systems was the cladding contractor who installed not only the louvers, but the entire cladding system on this project. We are w